Receta: Mordanting Animal fibers
(such as wool or silk)
Preparation: The fabric should be washed as hot as possible. I.e. wool and silk with wool detergent at approx. 30°C.
Procesamiento
Paso 1: For approx. 100 g of fabric, dissolve 30 g of Potash Alum (#64100) in 200 ml of hot water. Then stir this solution into 4-5 l of cold water.
Paso 2: Place the washed and rinsed, damp dyeing fabric in the mordant bath and heat slowly to approx. 40°C. Remove the pot from the stove and let it cool down.
Paso 3: It is best to leave the fabric in the solution overnight or even longer, gently moving it from time to time. Then rinse well and place in the prepared dye bath while still moist.
Ingredientes
| ca. 100 g | Textile fiber |
| 30 g | Alumbre potásico (#64100) |
| 4-5 l | Agua |
| Pot | |
| Termómetro |
Nota
Depending on the fabric itself (i. e. wool, cotton, silk), the exposure method, time and intensity, the dyes unfold many different shades.
Kremer Pigmente no se hace responsable del resultado de aplicación de los procesos aquí descritos. En todos los casos, recomendamos la realización de pruebas previas a cualquier aplicación definitiva
