Receta: Violet Logwood Ink

This logwood ink has a beautiful, blue-tinged violet hue which soon becomes much more reddish when exposed to light and turns rather brownish after a few weeks.

Procesamiento

Paso 1: Boil the logwood in water for about half an hour and then filter.
Add gum arabic to the hot liquid and stir until it is dissolved.
Potash alum needs to be dissolved in hot water before adding it to the solution.
Paso 2: The ink forms little sediment, which can be left in the glass. You could decant the ink, but if you don t shake or stir it, the sediment won t bother you.

Ingredientes

20 g Palo de Campeche, piezas cortadas (#36100)
100 g Agua destilada (#65000)
2 g Goma arábiga, en polvo (#63330)
1 g Alumbre potásico (#64100)

Información adicional

Nota

The production requires the following tools: a scale, mortar and pestle, an enameled pot, glass rods or wooden sticks for stirring, glasses, funnels and filters.


Water
Only demineralized water (#65000) is used in the recipes.
Color result
Since many ingredients used in ink recipes are of natural origin, the color result may vary. Deviations from the original recipe may also change the result.
Filtration
The inks are filtered with paper filters.
Cooking
Keep the cooking pot closed with a matching lid.
Shelf life
Moldy ink should not be skimmed off. Please dispose if the ink.
Cleaning
Pots are best cleaned with hot water and a small amount of citric acid (#64150).

Kremer Pigmente no se hace responsable del resultado de aplicación de los procesos aquí descritos. En todos los casos, recomendamos la realización de pruebas previas a cualquier aplicación definitiva

Lista de productos

Autor: Kremer Pigmente, Recipe by: Lehner 1890, p. 104.