Recette: Silicate-Dispersion-Paint with Ludox® PX 30
This binding medium is very suitable for ceramic surfaces, indoor and outdoor concrete. Do not use in wet areas.
Traitement
Pas 1: Mix the binding media and stir them well.
Pas 2: Use only pigments which are stable in potassium silicate. Add the pigments in small portions to the binding medium solution, stir well, until you get a smooth paint with a viscosity like coffee cream. If the paint gets too thick, thin it with the binding medium.
Pas 3: Make sure to test the paint prior to applying the paint. In case the paint is chalking, add more binding medium.
Remarque
Minimum film forming temperature: 5°C. Estimated consumption: approx. 120 ml / m²
Nous déclinons toute responsabilité pour le résultat de l´application des processus décrits ici. Dans tous les cas, nous recommandons de réaliser des tests avant l´application définitive.
