Ricette: Silicate-Dispersion-Paint with Ludox® PX 30
This binding medium is very suitable for ceramic surfaces, indoor and outdoor concrete. Do not use in wet areas.
Lavorazione
Passo 1: Mix the binding media and stir them well.
Passo 2: Use only pigments which are stable in potassium silicate. Add the pigments in small portions to the binding medium solution, stir well, until you get a smooth paint with a viscosity like coffee cream. If the paint gets too thick, thin it with the binding medium.
Passo 3: Make sure to test the paint prior to applying the paint. In case the paint is chalking, add more binding medium.
Nota
Minimum film forming temperature: 5°C. Estimated consumption: approx. 120 ml / m²
Non ci assumiamo alcuna responsabilità per l'istruzioni di elaborazione sopra descritte. In ogni caso, raccomandiamo la produzione e la valutazione delle superfici dei campioni.
