Receta: Imperial Yellow Ink

In the 19th century, "Imperial Yellow" was originally made with buckthorn berries. There was also a synthetic dye of the same name.

Imperial yellow ink is transparent and has an intense yellow with a slight green tint. This ink darkens a bit when exposed to light. It has a slightly acidic smell and dries up a little shiny. After about two weeks, a sediment may form.

Procesamiento

Paso 1: The buckthorn berries need to be ground finely in a mortar. Stir the powder into the water and boil for one hour.
Paso 2: Then add alum and boil again for one hour. Dissolve gum arabic in the filtered, still hot solution.

Ingredientes

28 g Bayas maduras de cambronera, no maduras (#373901)
150 g Agua destilada (#65000)
3,6 g Goma arábiga, en polvo (#63330)
2,8 g Alumbre potásico (#64100)

Información adicional

Nota

The rim of the jar should always be wiped clean before closing, otherwise the ink can dry, crack and small chunks may fall into the ink when re-opening the jar.

The production requires the following tools: a scale, mortar and pestle, an enameled pot, glass rods or wooden sticks for stirring, glasses, funnels and filters.


Water
Only demineralized water (#65000) is used in the recipes.
Color result
Since many ingredients used in ink recipes are of natural origin, the color result may vary. Deviations from the original recipe may also change the result.
Filtration
The inks are filtered with paper filters.
Cooking
Keep the cooking pot closed with a matching lid.
Shelf life
Moldy ink should not be skimmed off. Please dispose if the ink.
Cleaning
Pots are best cleaned with hot water and a small amount of citric acid (#64150).

Kremer Pigmente no se hace responsable del resultado de aplicación de los procesos aquí descritos. En todos los casos, recomendamos la realización de pruebas previas a cualquier aplicación definitiva

Lista de productos

Autor: Kremer Pigmente, Recipe by: Lehner 1890, pp. 183-184.